How to Enable the Traefik Dashboard
How to Expose a Service with Traefik
This post walks through exposing a service with Traefik ingress.
How to Boot from USB
In the fall of 2020, Raspberry Pi released the long-awaited Raspberry Pi 4 boot EEPROM to boot directly from a USB3 drive without having the MicroSD card plugged...
How to Install Rancher Labs k3s on Raspbian or Ubuntu
Add Cgroups to Linux
Before jumping into Kubernetes, Linux needs to be setup...
How to use Kubernetes Dashboard
How to Centralize Logs
Whoops, I did it again! I lost access to my primary node, but I don’t know why because the logs aren’t accessible. I need centralize logging outside of...
How to bind to the right USB storage driver
The article How to Configure Raspbian Linux discussed using the usb-storage.quirks parameter to bind to the right storage manager. This side note goes on to explain usb-storage.quirks...
How to Multicast Commands
If you are more Dev than Ops, like me, then you will think this is cool. If you are more Ops than Dev, then you already know how...
How to check the revision number of your Raspberry Pi
As mentioned in the article, there was a design flaw of the Raspberry Pis prior to revision V1.2 causing some USB-C power cables not to work. There...